Diamond Grade Reflective Film 

 The performance of this series of reflective film is the Ministry of Communications Ministerial JT-T279-1995 standard first and second 
 Grade reflective sheeting, reflective of its principle is different from the engineering level and high-strength grade reflective film reflective glass beads used in principle 
 But the use of a ceramic cube reflection of the latest technology. Diamond Grade Reflective Film 
 After each ceramic cube arrangement connected in a square centimeters of material there will be an area of ??more than 930 ceramic Li 
 Side angle body. Ceramic body of the lower cubic angle formed by a sealed air layer, so that total internal reflection of incident light to form, from the 
 Not require the use of metal reflective layer to achieve the most excellent reflective effect. Use wear-resistant polycarbonate material with high hardness 
 Cube technology and microcrystalline diamond grade reflective film made of the traditional project-level and high-intensity grade reflective film comparison, the anti- 
 Optical performance not only greatly increased, and wide-angle performance is also greatly improved. The brightness of the diamond grade reflective sheeting for the class project 
 More than six times, is more than three times the strength level. 

 For highway and urban road traffic signs. In normal use, 10 years later to the brightness retention 
 Initial brightness values ??less than 50%. Use the same type of ink used screen printing technology can produce a variety of patterns. 

 Uses: directional sign; prohibited signs, warning signs and directional signs and signs used in general advertising. 

 Life: general for 10 years, the series of reflective film in normal use, 10 years after the beginning of the brightness retention of at least 
 The beginning of the brightness value of 50%. 

 Applicable floor: aluminum, steel. 

 Operating temperature: 18 degrees generally require 28 degrees Celsius. 
 3M reflective film super-class: The body of microcrystalline cubic corner reflector technology, is currently the most advanced reflective technology, with superior performance and excellent positive point of view reflective properties, the use of total reflection reflective principle, not the metal reflective layer, day and night pure color, increase the visibility flag on the environment, transport and processing conditions greatly enhance the applicability, film is more simple, more hard surface film, and enhance the product wear resistance, friction performance, wrinkle-free surface film, since bubbles and other phenomena, the surface smooth, bright colors, eye-catching, the surface is not easy to gather water droplets and dust, increasing the visibility during the day, marking a more beautiful, safer driving, the use of more durable, excellent UV resistance, at 10 Guarantee does not fade in life, powder, off. 
 According to the traffic in the three industry standard JT/T279-1995 reflective film, the national standard GB/T18833-2002 in the second reflective film needs. It also consistent with and surpassed the United States AETM4956-2001, III, and IV class of the relevant provisions of reflective film. 

 Size: 1.22M * 45.72M/55.74 square meters / roll 

 Color: white, yellow, red, orange, blue, green, brown 

 Can be screen printing, paste in the adhesive layer of aluminum. 

 Note: Because 3M reflective film super-class hard, difficult to use for general cutting plotter lettering, the company also aimed to resolve this problem, the development of the diamond, super special cutting plotter film!